Function „Format - Renkforce 1000562 Notice D'emploi

• Confirm the setting with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
Function „Format"
If required, the inserted memory card can be reformatted. This not only can be used for
quick and complete deletion of the memory card. Reformatting can also ensure that the
memory card contains the right file format for the digital recorder to store recordings
on the memory card.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Format" and then push „
• Use the buttons „2" and „8" to switch between „Yes" (format memory card) and
„No" (cancel).
When formatting the memory card, all data saved on it are lost.
• Confirm the selection with the button „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
".
".
".
67