Function „Overwrite; Function „Time Stamp - Renkforce 1000562 Notice D'emploi

Function „Overwrite"
For a full memory card, no new recording can be performed and the memory card must
be replaced with a new, empty one (or the data on the memory card must be recopied
to a computer).
If desired, an overwriting function can be activated, however. The respective oldest
recording is then replaced by the new one.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Overwrite" and then push
„ ".
• Use the buttons „2" and „8" to switch between „On" (overwriting function on) and
„Off" (overwriting function off).
• Confirm the selection with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
Function „Time Stamp"
The date and time can be displayed in the recordings. This will enable you to find at
once at which times a person is in the monitoring are, for example, when watching
the video later.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Time Stamp" and then push
„ ".
• Use the buttons „2" and „8" to switch between „On" (time and date display on) and
„Off" (display off).
When the function is on, the display has the format year/month/day + hours/
minutes/seconds.
• Confirm the selection with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
76
".
".