Télécharger Imprimer la page

Function „Photo - Renkforce 1000562 Notice D'emploi

Publicité

Les langues disponibles

Les langues disponibles

The respective current playback speed is displayed at the bottom by the digital
recorder („X2", „X4", „X8" or „X20").
The display also shows the overall duration of the recording and the current
time position in the lower right.
If the function „Time Stamp" was on during recording, the upper right of the
display shows the date and time of the recording.
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly if required to stop or terminate playback and to
return to the respective previous menu or leave the OSD menu.
Function „Photo"
• If photographs are present, they are displayed with the corresponding file name that
contains the date (year/month/date), time (hours/minutes/seconds) and the channel
number (CH1 or CH2).
Example: PIC_20131125_212036_1_CH1_MAN.JPG
The picture was recorded on 25 November 2013, 21:20:36 hours, by channel 1.
• Use the buttons „2" and „8" to select the desired picture.
To delete the selected picture (or to delete all pictures), keep the button
" pushed for about one second.
Then a window „Delete All/Current, Cancel" is displayed.
Use the buttons „2" and „8" to choose between:
„Delete All":
„Delete Current": Only delete the currently selected picture
„Cancel":
Confirm the selection with „
chosen, a safety prompt will appear („Yes" = delete, „No" = cancel). Select
your answer as usual with the buttons „2" and „8" and confirm with
".
Attention!
Deleted data cannot be recovered!
Delete all pictures
Cancel
". If „Delete All" or „Delete Current" were
79

Publicité

loading