Function „Frame Rate"
In this function, you can set the frame rate for the recordings (15, 25 or 30 frames per
second).
A high frame rate shows motions very smoothly but requires lots of memory on
the SD/SDHC memory card.
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Frame Rate and then push
„
".
• Set the desired frame rate with the buttons „2" and „8" (15, 25 or 30 frames per
second).
• Confirm the setting with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
Function „Rec Resolution"
Here, you can set the resolution with which the recordings are saved (resolution of
320 x 240, 640 x 480 or 720 x 576 pixels).
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Rec Resolution" and then push
„
".
• Set the desired resolution with the buttons „2" and „8".
• Confirm the setting with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
The currently set resolutions displayed at the lower left of the display of the
connected screen:
„CIF" = 320 x 240, „VGA" = 640 x 480, „D1" = 720 x 576
".
".
75