Struers Discotom-5 Manuel D'instructions page 123

Connecting wires
Fig. 2
Before working, disconnect the power to the Discotom.
! Disconnect the 2 existing cables going into the Discotom.
Remember to mark their original position or reinsert the
wires without mounting the back plate.
! Drill the holes in the back plate according to drawing
15117675 (if not already prepared).
! The brake box has two wires W21 and W22. Remove or lift the
machine's cabinet to gain access to the top of the contactors.
Cable with red wires (W21) through lower hole.
Cable with black wires (W22) into top hole.
! Mount auxiliary contactor (cat no.: 2KH00122). See fig 2
Important
2