Cooling Valve Positions; Cutting Position; Cleaning Positions - Struers Discotom-5 Manuel D'instructions

Cooling Valve Positions

Cutting Position

Cleaning Positions

8
Discotom-5
Instruction Manual
In the back of the cutting chamber the flush hose, and a valve for
cooling and cleaning, are located.
During cutting the valve is placed in the vertical position to cool
the cut-off wheel. During cleaning the valve is turned clockwise to
regulate the water flow of the hose.
Turn the knob counter-
clockwise to vertical
position to cool the cut-
off wheel.
Turn the knob to regulate
the flow while flushing
the cutting chamber.
Turn the knob clockwise
to vertical position for
flushing the cutting
chamber with maximum
flow.