Protective Equipment; Structural Modifications And Spare Parts; Signs; Residual Risk - aqua technix AQ 280 Traduction Du Instruction D'utilisation Originale

Safety
2.4

Protective equipment

Reaching into moving parts, e.g. coupling and/or impeller fan, can
cause serious injury.
 Never operate the pump/unit without protective covers.
2.5

Structural modifications and spare parts

Alterations or modifications can affect operational safety.
 Never modify or alter the pump/unit without the
manufacturer's permission.
 Only use original spare parts and accessories authorised by
the manufacturer.
2.6

Signs

 Ensure that all the signs on the complete pump/unit remain
legible.
2.7

Residual risk

2.7.1

Pressure load

If the pressure vessel bursts, it could lead to severe injuries or
serious material damage.
 Turn the pump off before commissioning.
 Depressurise the system.
 If air is trapped in the filter body, it has to be evacuated.
Do not operate the filter system above the admissible

operating pressure.
 Due to excess pressure, the filter container should not be
connected tot he domestic water supply.
2.7.2

Rotating parts

There is a risk of shearing and crushing due to exposed rotating
parts.
Only perform servicing when the pump/unit is not in

operation.
 Prior to servicing, ensure the pump/unit cannot be switched
back on.
 Immediately after finishing servicing, reattach or reactivate all
protective equipment.
8 EN 06|2019