Directions For Use; Priming And Loading The Disposable Set - Moog EnteraLite Infinity Manuel De L'opérateur

2. DIRECTIONS FOR USE

Recommendation for First Use:
Since.battery.may.not.be.fully.charged.when.pump.is.first.received,.it.is.recom-
mended.that.battery.be.charged.for.6.hours.prior.to.operating.on.battery.power.
(see Page 18 for additional information).

Priming and Loading the Disposable Set

Step 1:
4 If you are using the Safety Screw Con-
nector or Spike set with a vented bottle or
pre-filled bag
. . Remove.protective.cover.from.tip,.then.insert.
tip.into.formula.exit.port.of.container..If.using.
the.Safety.Screw.Connector.set,.secure.the.
tip.by.tightly.screwing.threaded.components.
together..(Figure 2-1).
4 If you are using the 500ml or 1200ml dis-
posable set:
. . Hold.bag.upright.and.pour.in.feeding.solution.
(Figure 2-2)..Close.cap.securely.
NOTE:.Blenderized.or.aggressively.mixed.solu-
tions.may.have.foam..If.using.this.type.of.solution,.
allow.it.to.sit.for.10.to.15.minutes.before.pouring.
into.bag..This.will.reduce.the.chance.of.an.alarm.
due.to.air.in.the.tubing.
Step 2:
Remove.protective.cover.from.barbed.adapter..If.
using.pole.clamp,.protective.cover.may.be.placed.
in.the.groove.on.back.of.clamp.(Figure 2-3).
NOTE:.If.set.is.to.be.used.with.a.carry.pack,.all.air.
must.be.removed.from.bag.and.tubing..Continue
to step 3 for instructions on removing air..If.set.
is.to.be.hung.above.pump,.i.e..on.an.IV.pole,.you
may skip to step 4.
7
2. DIRECTIONS FOR USE
Figure 2-1 Screw Tip
onto Container
Figure 2-2 Fill Bag
Figure 2-3 Remove Cover
from Barbed Adapter / Place
Cover on Pole Clamp
© Copyright 2013 Moog, Inc.