4) Turn on the power and raise the
backrest to the upright position
①
Insert the power plug into the power outlet.
• Always be sure to insert into an AC 120 V plug.
②
Confirm the lock switch key is set to the "open" position.
③
Confirm the power switch is set to the "on" position.
lock switch power
②
open
lock
④
Press
on the controller twice.
• Press it once, and then press it again
after the screen appears.
• Backrest will rise automatically.
O
I
③
off on
Unit Body
Rear Side
Watch your
step to prevent
tripping on
①
AC 120 V
power cord or
the like.
EN13