Cleaning and maintenance
Never use chemicals such as thinner, benzine, alcohol, etc.
Notes on use
⁃
Be careful when using the unit with clothing such as jeans or colored clothes. (Cause of color transfer to the
synthetic leather and fabric portions)
⁃
Please avoid long time contact with plastic products etc. (Cause of discoloration)
Remove the dirt from the heel section with a vacuum cleaner.
• Any accumulated fibers or dust will adhere to the velcro fastener of
the sole cover, which may weaken the fixing force. Clean regularly
with a vacuum cleaner.
Sole cover: totally removable and washable
⁃
If the whole surface of the velcro fastener of the sole cover is not in close contact, socks and stockings
may get torn.
The narrower side
is the heel side.
[When you wash it completely]
Wash it with a laundry net.
⁃
Fold the sole cover in half, fasten the velcro fastener, and
wash it completely.
If you wash it without folding, the velcro fastener may
damage the sole cover.
⁃
If dust or hair gets tangled in the velcro fastener, remove it
with a toothpick.
■ To wash with water
⁃
Do not use a washing machine.
①
Soak it in water below 30 °C (86 °F) and press to wash it
gently.
• Never wash it by rubbing.
• Never use detergent containing bleaching
agents, as it may cause discoloration.
• Wash it separately from other
items, as it is easy to transfer dye.
②
Rinse thoroughly.
③
Drain the water by pressing it lightly.
• Never wring it out or dehydrate it, as it may
damage the fabric or loosen the strands.
EN36
Sole Massage Section
■ Removal
Remove the
velcro fastener.
■ Installation
Sole cover
• Fasten it with the
velcro fastener in
the order of heel
side and then the
toe side.
Quality indication
100 % Polyester
④
Stretch the wrinkles lightly and dry it in the shade.
• Never dry it in direct sunlight, as it may
cause the fabric to shrink and fade.
• Dry it immediately after washing, as it is
easy to transfer dye to other items.
⁃
After washing, if you are concerned
about creases, please iron it.
(Precautions for using an iron)
Cover it with a cloth and limit
the temperature of the sole
plate to 150 °C (302 °F).
あて布使用