When you want a massage with your favorite action
⁃
The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.
1
Turn on the
power.
4
Select the type of your favorite action from
"Knead", "Roll", "Knead&Roll" and "Tap".
5
Select one action
from the type selected in Step 4.
7
After body scanning ends,
massage starts.
EN26
2
Select "Manual"
from the menu.
⁃
If you select Knead down,
Knead up, Partial roll, Knead
up & Partial roll, Knead
down & Partial roll, Normal
tap or Soft tap, the position
of the massage rollers will not
move automatically.
Be sure to adjust the position
after starting. (EN32)
⁃
Displays for massage action.
⁃
During the massage, you can create
favorite settings. (EN30 to EN34)
3
Press
Select with
▲ or ▼.
Select with
◀ or ▶.
6
Press
Select with
▲ or ▼.
⁃
Start body scanning. (EN22 to EN23)
⁃
Body scanning may be skipped
depending on the selected course.
(EN21)
8
After the massage is started,
it will automatically end in a
maximum of approximately
15 minutes.
Massage
finished
automatically.
.
.