Body scanning
⁃
While a beeping sound is being made, the massage roller slowly
rises to the top.
Massage roller
Be sure to put your head on the pillow.
⁃
Do not move your head from the pillow until you have
determined the shoulder position.
If the correct shoulder position is not be found, an error
message
get terminated.
(Error display EN45)
may appear, and the operation may
Too high
Correct position of the
massage roller
(The point where the
tapping action should
be felt.)
Too low
⁃
When completed, the following
screen is displayed, and the
massaging is started.
⁃
⁃
⁃
If the shoulder position is greatly shifted, one
press of
will stop the action. Rest your
shoulders back against the backrest firmly and
press the button to start again.
Complete
Even during the tapping
action, when you press
body scanning will end and
massage will start.
If
is not pressed,
massage will start after
about 1 or 2 seconds.
To estimate the approximate
height based on the shoulder
position, the legrest may
automatically adjust its
angle so that the sole of the
foot touches.
EN23