Introduction; Package Contents; Most Common Applications And Listening Distances - KLEIN+HUMMEL O 410 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction

Thank-you for purchasing a Klein + Hummel loudspeaker. A Mathematically Modeled Dispersion™ waveguide
(MMD™), flexible acoustical controls, various input options and an extensive mounting hardware range allow the
loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety physical
locations. The latest acoustical and electrical techniques and components have been used to ensure the most
accurate sound reproduction possible. Klein + Hummel products are designed for longevity so we hope you enjoy
many happy years of using this product.
Depending on the size, Klein + Hummel's three-way systems are designed for use as near field monitors through
to large main control room monitors. They can be used in music, broadcast, and post production studios for
tracking, mixing, and mastering. They may be positioned used free-standing or flush mounted into a wall, and
can be mixed freely in multichannel systems.
Before reading the rest of this operating manual, review the safety and warnings section towards the back of this
book. Note that imperial dimensions are approximate.

Package Contents

The shipping carton contains:
This operating manual
Product guarantee
The loudspeaker
Three mains power cables (Euro, UK, and USA)
A trimmer and switch screwdriver
Signal cables are not included. Options and accessories are listed at the end of this operating manual.

Most Common Applications and Listening Distances

The minimum, recommended, and maximum listening distances are shown below, together with their most
common application:
Product
O 410
In multichannel systems, one should ideally use the same product for all main channels. However, as the rear
channels often contain less bass and the signals are mixed at a lower level than the front channels, the rear
loudspeakers can be smaller - table below for details. The center loudspeaker should always be of the same type
as the left and right loudspeaker. The subwoofer should be sufficient to keep up with the main loudspeakers - see
subwoofer operating manual for details.
Front
O 410
Operating Manual O 410
Most Common Application
Mid-field monitoring
Ideal Rears
Smaller Rears
O 410
O 300, O 300 D
Distances
Minimum
Recommended
1.5 m (5')
2.5 m (8)
Subwoofer(s)
Refer to subwoofer operating manuals
English
Klein + Hummel
Maximum
8 m (24')
3

Publicité

Table des Matières
loading

Table des Matières