KLEIN+HUMMEL O 410 Mode D'emploi page 20

Suitable combinations of the above hardware are:
Location of Loudspeaker
Flush Mounted
On a Floor Stand
(tripod, TV spigot, or with a
5/8" thread)
On a Subwoofer
(fitted with a flange)
On a Wall
Off a Ceiling
Off a Lighting or Truss Bar
Detailed mechanical drawings of these accessories can be found on line at www.klein-hummel.com.
Metal grille (GO 410)
A metal grille (pictured below) can be attached to the front of the loudspeaker to protect the drivers. It simply
clips into the grooves on the long sides of the cabinet. It is damped to avoid rattles and has been designed for
acoustic transparency. The grille is available in black and silver.
Flight case (FO 410)
As the original packing is primarily designed to get the loudspeaker from the factory to the end user, it is highly
recommended that a flight case (pictured above) is used if the loudspeaker is regularly moved between locations.
One O 410 can be packed in each flight case.
Operating Manual O 410
Hardware Combinations
nn
REK 1 and CP for electronics
LH 41
LH 41 + LH 28 + pole
LH 41 + LH 36 + LH 28 + pole
LH 41 + LH 29
LH 41 + LH 36 + LH 29
LH 41 + K&M stand 26790 and 26795
LH 41 + LH 36 + LH 48 + K&M stand 26790 and 26795
LH 41 + LH 37
LH 41 + LH 36 + LH 37
LH 41 + LH 28 + pole
LH 41 + LH 36 + LH 28 + pole
LH 42 + LH 45
LH 42 + LH 43
LH 42 + LH 45
LH 42 + LH 29
English
Klein + Hummel
18