Adjustment; E.3.2 Display Resolution Setting; E.3.3 Lighting Duration Setting; E.3.4 "Key Beeping" Setting - AOIP TC6621 Mode D'emploi

E.3.2 Display resolution setting
In the CONFIGURATION/SETUP/PREFERENCE menu, you can select the desired display resolution:

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the Resolution field by pressing the F1 key.

Three types of resolution are available: high (res=1µV), medium (res=10µV) and low (res=100µV).
Select this resolution using the navigation keys ( and ).


Confirm by pressing the VAL key.
E.3.3 Lighting duration setting
In the same menu (CONFIGURATION/SETUP/PREFERENCE), you can control the duration of the lighting (manual, 10s
or 1min). Press the ON/OFF key briefly to turn on the lighting for the selected duration (10s or 1min). Press it again briefly
to start the timing or to turn off the lighting in the case of the manual mode.

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the Lighting field by pressing the F1 key.
Choose the manual or timed mode using the navigation keys ( and ).


Confirm by pressing the VAL key.
"Key beeping" setting
E.3.4
In the CONFIGURATION/SETUP/PREFERENCE menu, you can emit a beeping sound every time a key is pressed:

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the Key Beeping field using the F1 key.
Using the navigation keys ( and ), select the ON or OFF mode then confirm by pressing the VAL key (if the

parameter settings are completed or go to the next field using the F1 key).
E.3.5 Language setting
In the CONFIGURATION/SETUP/PREFERENCES menu, the interface language can be selected from French, English,
German, Italian or Spanish.

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the LANGUAGE field using the F1 key.
Using the navigation keys ( and ), select your desired language then confirm by pressing the VAL key (if the

parameter settings are completed or go to the next field using the F1 key).
E.3.6 Temperature unit setting
In the CONFIGURATION/SETUP/PREFERENCES menu, you can choose the temperature unit that will be displayed.

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the TEMP unit field using the F1 key.
Using the navigation keys ( and ), select the desired unit, then confirm by pressing the VAL key.

E

Adjustment

NTA47230-300A6 87 / 101