D.2 Differential Measurements - AOIP TC6621 Mode D'emploi

TC-TM 66XX
Scaling pictogram
Remarks:
The parameters and scaling points are saved when turning the unit off.
Beware, when changing functions (thermocouple or resistive sensor) or units, scaling goes OFF. The data defined in the
point lists are then erroneous.
D.2 Differential measurements
The relative measurement function available on the device makes it possible to cancel a constant or spurious value via
programming.
When the relative measurement function is enabled, the symbol
The NULL/define menu makes it possible to program the value of the Tare (positive or negative). This value is obtained
from the measurements:
Value Displayed = Value measured – Value of the Tare
74 / 101 NTA47230-300A6
RELATED FUNCTIONS
is displayed on the measurement screen.
Pictogram of
TARE mode
the