Parameter Settings; E.1 Contrast Adjustment; E.2 Date And Time Setting; E.3 "Preferences" Setting - AOIP TC6621 Mode D'emploi

TC-TM 66XX
E. PARAMETER SETTINGS
E.1 Contrast adjustment
In the CONFIGURATION/SETUP menu, you can adjust the display contrast.

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Contrast field using the navigation keys ( and ), then confirm.

 Using the navigation keys ( and ), increase or decrease the contrast as required.
E.2 Date and time setting
In the CONFIGURATION/SETUP menu, you can set the time and date.

Access this menu using the F1 key.
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Date/Time field using the navigation keys ( and ), then confirm.

Use the navigation keys ( and ) to increase the various parameters.

 Use the navigation keys ( and ) to go to the next field.

Press VAL to confirm.
"Preferences" setting
E.3
E.3.1 Filtering setting
In the event of noisy measurements, you can filter the latter to make the value displayed on the screen more stable.

Access this menu using the F1 key (configuration menu).
Select the Setup field using the navigation keys ( and ), then confirm.

Select the Preferences field using the navigation keys ( and ), then confirm.


Select the Filtering field by pressing the F1 key.

Four filtering values are available (OFF, 0.5s, 1s and 2s). Select these values using the navigation keys ( and
).

Confirm by pressing the VAL key.
86 / 101 NTA47230-300A6

PARAMETER SETTINGS