B.1.4 The Measuring And Simulation Terminals For Each Device - AOIP TC6621 Mode D'emploi

B.1.4 The measuring and simulation terminals for each device
Both the TC6621 and TM6602 are fitted with 2 safety bushes (4 mm in diameter) and a miniature flat plug for
thermocouples. These connector assemblies are used both in measurement and emission modes (non simultaneous).
Negative
measurement and emission
Positive terminal in
measurement and
emission
Both the TC6622 and TM6612 are fitted with 4 safety bushes (4 mm in diameter) and a 4-pt circular connector. These
connector assemblies are used both in measurement and emission modes (non simultaneous).
F1 function key
CLEAR key
HOLD key
Navigation key
terminal in
Power-up
F2 function key
Confirmation key
(VAL)
ON/OFF key
Positive terminal in
measurement and
emission
Negative terminal in
measurement
emission
NTA47230-300A6
B
and
63 / 101