Grounding - Franklin Electric SUBDRIVE UTILITY UT2W 5870202003 Serie Manuel Du Propriétaire

GROUNDING

To ensure safety and performance, please observe the following grounding requirements:
Ensure that a
proper utility
ground rod
is present &
connected.
Service Entrance
Panel
GND
GND
Avoid multiple ground paths.
14
Service Entrance
Panel
L1
L2
GND
Service entrance
ground rod
GND
GND
An input power ground wire
from the supply panel must
be connected to the drive.
Service Entrance
Panel
Use the service
entrance panel
ground ONLY.
Pump
Motor
Motor ground wire MUST be bundled with motor wires.
A dedicated output ground wire
from the drive must be connected
to the motor (motor wires and ground
wires must be bundled together).
GND
Pump
Motor
DO NOT run ground wire separate.
Pump
Motor