Setting The Basis Dial Mode; Reset Base Settings; Telephone Settings (Hs); Setting The Alarm - HumanTechnik freeTELeco Mode D'emploi

Masquer les pouces Voir aussi pour freeTELeco:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47

Setting the basis dial mode

1. Press the "Menu" key and select the
entry "BS Settings" with
3. With the
key, scroll to "Dial Mode" and
press "Select".
complete the setting with "Save".
1. Press the "Menu" key and select the
entry "BS Settings" with
"Select".
4. With
, you can select between Flash-1
(100ms) and Flash-2 (300ms), and con-

Reset base settings

1. Press the "Menu" key and select the
entry "BS Settings" with
with "Reset".

Telephone settings (HS)

Setting the alarm

With the handset, you can set an alarm with
a snooze function.
1. Press the "Menu" key and select the
entry "HS Settings" with
5. Enter the preferred alarm time and con-
6. Turn the snooze function on or off, and
complete the procedure with "Save".
display when the alarm is enabled.
.
.
.
.
7. When the alarm sounds, you can turn it
off by pressing any key. If you have ena-
bled "snooze", the alarm will sound again
after 10 minutes until you turn the alarm
off again.

Turning off the alarm

1. Press the "Menu" key and select the
entry "HS Settings" with
Audio settings
You can pre-set the volume of the receiver
and speaker.

Setting the loudspeaker volume

1. Press the "Menu" key and select the
entry "HS Settings" with
"Select".
complete the procedure with "Save".
Setting the earpiece volume
1. Press the "Menu" key and select the
entry "HS Settings" with
"Select".
complete the procedure with "Save".
.
.
.
English 37

Publicité

Table des Matières
loading

Table des Matières