Renaming The Handset; Display Contrast; Select Base; Reset Handset Settings - HumanTechnik freeTELeco Mode D'emploi

Renaming the handset

The standard name of the handset is "HS n"
(n is a number from 1 to 5). This number in-
dicates that the handset is registered as the
n handset on the base. HS 1 is registered
th
on the base as the 1
The name of the handset is displayed in
standby mode.
1. Press the "Menu" key and select the
3. Enter the name and complete the setting
with "Save".

Display contrast

1. Press the "Menu" key and select the
entry "HS Settings" with
"Select".
4. Select the preferred contrast from 0 to
16 with and complete the setting with
"Save".
Automatic call answering
With automatic call answering, you can ac-
cept a call without pressing any key by lifting
the handset out of the charging station.
1. Press the "Menu" key and select the
entry "HS Settings" with
"Select".
4. Select "On" or "Off" and complete the
setting with "Save".
handset.
st
.
.
.
The normal range of the volume setting is
ched on, the volume is increased to 15 to
30 dB.
1. Press the "Menu" key and select the
entry "HS Settings" with
lect".
4. Select "On" or "Off" and complete the
setting with "Save".

Select base

You can select a base on which the handset
is already registered. You can only select
bases, which are already registered on the
handset.
1. Press the "Menu" key and select the
entry "HS Settings" with
"Select".
4. Select from the different bases with
base is now located and set.

Reset handset settings

1. Press the "Menu" key and select the
entry "HS Settings" with
lect".
with "Reset".
In addition to the ringtone, you can turn on
To do this, hold the
Follow the same procedure to turn the func-
tion off again.
.
.
.
for 3 seconds to turn
English 39
-
-
-