Technical Data - salmson SXS Serie Manuel D'installation Et Mise En Service

English
5.2

Technical data

Max. flow rate
Max. delivery head
Speed
Mains voltage
Nominal current
Frequency
Insulation class
Protection class
Power consumption P
Nominal diameters
Connection flange
Pump weight
Permitted ambient
temperature
Max. rel. humidity
Approved fluids
SXS/NSB-S
Permissible
fluid temperature
Max. permissible operating
pressure
Emission sound-pressures
level
Emission of interference
Resistance to interference EN 61000-6-2
CAUTION! Risk of injuries to personnel and damage to the product!
Impermissible fluids can damage the pump and also cause injury to persons.
Comply strictly with the relevant safety data sheets and manufacturer's
data!
30
Depends on the pump type (see catalogue)
Depends on the pump type (see catalogue)
Depends on the pump type (see catalogue)
1~230 V to DIN IEC 60038
3~400 V to DIN IEC 60038
3~230 V to DIN IEC 60038
(optionally with change-over switch)
For other voltages see name plate
See name plate
See name plate (50 or 60 Hz)
See name plate
See name plate
See name plate
1
See type key
See type key
Depends on the pump type (see catalogue)
-20 °C to +40 °C
 95%
Drinking water and water for foodstuff applications to
EC drinking water directive. In systems to the German
drinking water regulations 2001 and DIN 50930-6, pumps
with housings of bronze (CC 499K) or stainless steel must
be used.
Drinking water:
SXS:
to 24 °e: max. +80 °C (for a short time (2h): +110 °C)
Exception: NSB-S:
to 22 °e: max. +65 °C (for a short time (2h): +80 °C)
See name plate
< 50 dB(A)
(depending on the pump type)
EN 61000-6-3
Salmson 12/2013