BH LK500Ti Guide D'utilisation page 9

ASSEMBLY INSTRUCTIONS
STEP 3
(This step will require two people)
Put the Console (A) above the Lower Console Structure (E) and connect the wires as shown in
the fi gure below. Then attached the Console (A) to the Lower Console Structure (E) with Screws
(C,J). Be careful not to damage the wires. Note: The control wire has a red mark.
Safety Key Wire (Upper)
Control Wire (Upper)
Keyboard Cable (Upper)
Hand Grip Pulse Wire (Upper)
Computer Grounding Wire
Lower Control Wire (Upper)
Lower Control Wire (Lower)
Frame Grounding Wire
Hand Grip Pulse Wire (Lower)
Keyboard Cable (Lower)
Control Wire (Lower)
Safety Key Wire (Lower)
Register your product warranty online at: www.BHFitnessUSA.com
16
Questions regarding warranty and parts call: 636.634.2217
3-1
ASSEMBLY INSTRUCTIONS
STEP 4
Place the cup holders on the Lower Console Structure (E) and tighten by turning the left cup
counter clockwise and the right cup clockwise (as shown in image below).
Cup
STEP 5
Remove the power cord and insert it into the machine, then place the Power Cord Switch Cover
(h) onto the machine and tighten with Screws (i).
Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
17