BH LK500Ti Guide D'utilisation page 8

ASSEMBLY INSTRUCTIONS
STEP 1
Attach the Left Upright (C) onto Frame (B). Then attach the control wire (located on the right
of the motor shroud) to the guide wire coming out of the bottom of the Right Upright (D). Then
pull the guide wire (that is attached to the control wire) through the Right upright (D) and out
the top with the control wire. Be careful not to damage the wires. Then attach the Right Upright
(D) to the Frame (B).
Register your product warranty online at: www.BHFitnessUSA.com
14
Questions regarding warranty and parts call: 636.634.2217
ASSEMBLY INSTRUCTIONS
STEP 2
(This step will require two people)
Place the Lower Console Structure (E) above the Left & Right uprights (C,D). Attach the control
wire sticking out of the Right Upright (D) to the guide wire located on the bottom right of the
lower console structure. Then pull the control wire through the lower console structure with
the guide wire. Then attach the Lower Console Structure (E) to the Left & Right Uprights (C,D)
with the Nylon Nut (a) and tighten the Screws (c). Attach the Left & Right Motor Lateral Covers
(F,G) with Screws (b), tighten securely.
Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
15