Beverage Length Quick Programming - Gaggia Milano Accademia Mode D'emploi

BREWING MAY BE PRECEDED BY SHORT SPURTS OF MILK AND STEAM: RISK OF SCALDING! REFER TO THE SECTION
"MILK CONTAINER USE".
This section shows the programming procedure for the Cappuccino. This is meant as an example to introduce you to the steps necessary for
a quick and easy programming of all the beverages .
After a quick programming of the beverage, it is possible to carry out a fi ner and more detailed adjustment by means of the "BEVERAGE
MENU" (see page 22).
1
Place the cup or the container where
the cappuccino or latte macchiato will
be brewed.
4
CAPPUCCINO
ECO MODE ON
The machine starts brewing: coff ee is
ground and milk is heated up to prepare
for dispensing .
Beverage length has been programmed. From now on, this length will be applied to the brewing of this beverage.
For the other beverages: hold pressed the button of the beverage to be programmed and follow the same procedure.

BeVeraGe lenGtH QUiCK ProGramminG

2
Rotate the upper part of the container
handle on the cup . Use your everyday
cup .
5
CAPPUCCINO
Milk dispensing begins . When the
desired quantity has been reached, press
"STOP".
3
15/01/10
10:38
Hold the button pressed for 3 seconds to
start programming .
6
CAPPUCCINO
Once milk has been dispensed, the
machine starts brewing the coffee. When
the desired quantity has been reached,
press "STOP".
21