FLUX F 550 Serie Notice D'instructions page 33

Caution - risk of injury!

Use hearing protection. Only operate compressed air motors with
the silencer or exhaust hose provided with the motor.
Attention!

Empty pump, hose and fittings before transport. Totally open the
fittings for emptying.

The mains plug must be pulled and the power cable must be rolled
up.

Remove the pump from the container for transport. On no account
may the pump be moved together with the container by pulling on
the hose.

Equip the pump with an appropriate lifting device so that it cannot
fall.

Observe the maximum temperatures:
Liquid temperature [°C]
0 up to 40
> 40 up to 90
Attention!

Make sure that the operator has read and understood the
operating instructions.

The operator must be instructed on proper use before operating
the pump.

Only use the pump for the intended use.

Immerse the pump in the liquid up to a maximum of below the dis-
charge connection.

Never leave the pump unattended.
Attention!

When using pumps and motors in hazardous areas, do not use
motor adapters.

Only switch the motor on when the pump is in the liquid.

No dry running.

Before you switch on the pump make sure that there is still enough
liquid in the container (dry running).
Original operating instructions Eccentric worm drive pump F 550 and Sanitary pump F 560
Maximum ambient temperature [°C]
-20 up to 40
T4
T3
33/88