What To Do In Case Of A Problem - BORETTI M-system MI-90 Notice D'emploi

What to do in case of a problem

The hob or the cooking zone doesn't start-up :
• The hob is badly connected on the electrical network.
• The protection fuse cut-off
• The looking function is activated
• The sensitive keys are covered of grease or water.
• An object is put on a key.
The symbol [ U ] displays :
• There is no pan on the cooking zone.
• The pan is not compatible with induction.
• The bottom diameter of the pan is too small.
The symbol [ II ] displays :
• Refer to the chapter "Pause".
The symbol [ E ] or [ C ] displays :
• The electronic system is defective.
• Disconnect and replug the hob.
• Call the After-sales Service.
One or all cooking zones cut-off :
• The safety system functioned
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
Continuous ventilation after cutting-off the hob :
• This is not a failure, the fan continuous to protect the electronic device.
• The fan cooling stops automatically.
The automatic cooking system « go and stop » doesn't start-up :
• The cooking zone is still hot [ H ]
• The highest power level is set [ 9 ]
• The cooking level was engaged with [ - ]
The symbol [ U ] displays :
• Refer to the chapter "Keep warm".
62