Timer - BORETTI M-system MI-90 Notice D'emploi

• Start up / Stop the Second booster
Action
Start up the 1rst booster
Start up the 2nd booster
Zone selection
Stop the 2nd booster

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
• Setting and modification of the cooking time of a heating zone
Action
To select a heating zone
To select the power level
To select the « Timer »
Decrease the time
Increase the time
The time is configured and the cooking starts until the time reaches [ 00 ]
• To stop the cooking time of a heating zone
Action
To select the « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
• Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings
and the heating zone stops.
To stop the sound and the blinking it is enough to press the key [ - ] or [ + ] from the timer.
58
Control panel
Press key [ P ]
re-press key [ P ]
Press key [ + ] or [ - ] from the desired
heating zone
Press key [ - ]
Control panel
Press on key [ + ]
Press on key [ + ] or [ - ]
Press on timer key [ - ] and [ + ]
simultaneously until the
desired heating zone.
Press on timer key [ - ]
Press on timer key [ + ]
Control panel
Press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone
Press on timer key [ - ]
Press second time on timer key [ - ]
Display
control light is on
control light is blinking
[ ]
[ 9 ]
Display
[ 4 ]
[ 1 ] to [ 9 ]
timer control light is on
[30] wents to 29,28..
the time increases...
Display
The time displays
displays [01]
displays [00]