Function "Keep Warm - BORETTI M-system MI-90 Notice D'emploi

• Setting and modification of the "Egg Timer"
Action
To start:
To select the "Egg Timer"
Decrease the time
Increase the time
When the time reaches [00] it is blinking and beeping.

Function "keep warm"

This function of maintenance to the heat makes it possible to reach and maintain automatically a
temperature of 42°C and 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
• To engage, to start the function " keep warm "
Action
To engage 42°C
To engage 70°C
To select the desired
To stop the function
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during approxi-
mately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.
Automatic cooking
All the cooking zones are equipped with an automatic "go and stop" cooking device. The cook-
ing zone starts at full power during a certain time, then reduces automatically its power on the
preselected level.
• Start-up
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Control panel
Touch the key [ 0/I ]
press once on timer key
[ - ] and [ + ] simultaneously
Press on timer key [ - ]
Press on timer key [ + ]
Control panel
Press [ U ] key
Press [ U ] key 2 times
Press key [ + ] or [ - ]
from the heating zone
Press key [ + ] or [ - ]
Control panel
Press on key [ + ]
Press on key [ + ]
Press on key [ + ]
Press on key [ - ]
Display
[ 0 ]
The time displays
[30] wents to 29,28,27,
the time increases...
Display
keep warm control light is on
keep warm control light is blinking
[ u ] or [ U ]
[ 0 ] to [ 9 ]
Display
[ 4 ]
[ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]
NL
FR
D
EN
59