Gallignani GA FB 12 Manuel D'utilisation Et D'entretien page 100

GENERAL INFORMATION
Agricultural accidents can be prevented with
your help.
All agricultural accident prevention programmes de-
pend on the full cooperation of the person charged
E
with the machine use.
N
Most accidents can be avoided by observing simple
G
safety rules.
L
I
It has been proven that "the best safety system" is the
S
operator himself, complying with all the regulations
as for accident prevention and machine mainten-
H
ance.
WARNING: this symbol is used in the
manual whenever matters involving your
safety are concerned.
TAKE TIME, READ AND FOLLOW THE INSTRUC-
TIONS; PAY ATTENTION!
YOU CAN NEVER BE TOO PRUDENT.
SOME OF THE ILLUSTRATIONS IN THIS MAN-
UAL SHOW THE SAFETY GUARDS OPEN OR RE-
MOVED, FOR BETTER DESCRIBING SPECIAL
FEATURES OR ADJUSTMENTS.
MAKE SURE ALL THE GUARDS ARE FITTED OR
CLOSED BEFORE OPERATING THE MACHINE.
WARNING SYMBOLS AND SIGNS
Personal safety
Three types of warning signs appear in this manual
and in the decals applied to the machine ("CAU-
TION", "WARNING" and "DANGER") followed by
specific instructions or decals with symbols clearly il-
lustration the type of hazard. These precautions con-
cern your safety and the safety of those working
nearby and with you.
Pay special attention to these warning signs.
1- -6
SAFETY
CAUTION: sign used when the involved
operations comply with the general safety
rules and when the compliance with the
baler use and maintenance instructions avoids
involving the operator or third parties in potential
hazards.
WARNING: it refers to a potential and
hidden hazard which could result in severe
damages and personal injuries; it describes
the most suitable means that the operator and third
parties should
unexpected accidents.
DANGER: it describes forbidden working
practices and procedures, as they are
extremely hazardous.
FAILURE TO COMPLY WITH THE INSTRUCTIONS
ACCOMPANIED BY THE TERMS "CAUTION",
"WARNING" AND "DANGER" MAY CAUSE SERI-
OUS INJURIES OR EVEN DEATH.
Machine safety
Other types of signs ("NOTE", "IMPORTANT", "AT-
TENTION") are followed by special instructions, re-
ferring to the safeguarding of the machine.
NOTE: it highlights correct techniques or procedures
to be implemented by the operator.
IMPORTANT: the term "IMPORTANT" is used to in-
form the reader about a procedure that might prevent
even light damages to the machine.
ATTENTION: the term "ATTENTION" is used to in-
form the operator that, unless a special procedure is
followed, severe damage could occur to the ma-
chine.
implement to avoid sudden