Product Configuration (4.5); Product Configuration; Modules Installed (4.6); Modules Installed - Grundfos RCME Notice D'installation Et De Fonctionnement

15.5 Product configuration (4.5)

Fig. 30 Product configuration
The setting in this display must be made according to the actual
system. Under normal conditions, the factory setting does not
need to be changed.
If the system is a complete Grundfos RCME system, select
"RCME".
If the system has been specially built for the specific application
and is controlled by a Grundfos "Rainwater Control", select
"Rainwater Control".

15.6 Modules installed (4.6)

If the tick box in this display is checked, the number of inputs and
outputs will be increased if an IO 351B module is installed.
See section

15.3 Inputs and outputs

Fig. 31 Modules installed
(4.3).

15.7 Basic settings, CU 372 (4.7)

In this menu, the basic settings of the CU 372 can be made:
• Activation of service language, English
Other settings related to CU 372
•

– Display language

– Units

– Date and time

– Password for "Operation" and "Settings" menus

– Ethernet

– GENIbus number

– Software status.

Fig. 32 Basic settings, CU 372
If the service language is selected, the symbol
Note
is shown in the upper right corner of all displays.
19