User-Defined Alarms (4.4); User-Defined Alarms - Grundfos RCME Notice D'installation Et De Fonctionnement

15.3.6 Counter inputs (4.3.4)
Fig. 27 Counter inputs
This display shows the counter inputs and functions of the
CU 372.
Available counter inputs:
Flow, mains water
•
Flow, rainwater
•
Flow, booster pump.
•
15.3.7 Counter inputs (4.3.4.1 - 4.3.4.3)
Configure the counter inputs in these displays.
This display shows an example of the configuration of a digital
flowmeter measuring the mains water consumption.
Fig. 28 Flow, mains water
18

15.4 User-defined alarms (4.4)

Fig. 29 User-defined alarms
In this menu, it is possible to enable and disable monitoring of the
following conditions:
Mains water valve open
•
Mains water flow detected
•
Feed pump running.
•
For each of the monitored conditions, a time limit can be set.
The time limit determines the delay between detection of the
condition and activation of the alarm. In case of an alarm, the
system will stop.
Factory setting
Monitoring enabled.