Hot Water Dispensing; Setting The Boiler Temperature; Version: Carisma S (Wands: Steam - Water) - Faema Carisma S-1 Manuel D'utilisation Et D'installation

Hot water dispensing

Scalding hazard!
Warning: Do these steps very carefully. Use the special
insulated devices to move the water and steam wands.
1
Carisma S
(wands: steam - water)
Place a container beneath the hot water tube and turn the knob
counterclockwise.

4. Setting the boiler temperature

Version: Carisma S (wands: steam - water)

To set the boiler temperature, follow these steps:
Scalding hazard!
Warning: Do these steps very carefully.
1
To access the programming
menu, press and hold the
center key OK for at least 4
seconds.
Carisma A Quicksteam
(wands: water - Quicksteam)
2
Instant boiler temperature
SET
*
Set temperature
An asterisk and the word SET
appear on the display.
2
Carisma S
(wands: steam - water)
When the desired dose has been reached, stop the hot water
by turning the knob clockwise.
3
OK
SET
*
Use the +/- keys on the side
to set the boiler temperature
(value with large characters).
35
Carisma A Quicksteam
(wands: water - Quicksteam)
4
C o n f i r m a n d e x i t t h e
p r o g r a m m i n g m e n u b y
pressing the center key OK.