Publicité
Les langues disponibles
Les langues disponibles
Place the canopy (18) on the fuselage and secure it by fitting the retaining screw (19)
through the slot.
Cut the Velcro (hook-and-loop) tape (20) to size and stick it in the position shown.
Apply the mating piece of Velcro tape (21) to the wing (15).
The wing
Glue the carbon fibre tube (17) in the wing as shown. Glue the aluminium screw
sleeves (16) in the wing from the top. Caution: push them into place briskly, and do
not use activator under any circumstances.
23
Publicité
