Summary Maintenance Table - Stiga Park 4WD Serie Manuel D'utilisation

EN
by STIGA SpA.
The warranty does not cover:
• Normal consumable material wear such as worm
screws, etc.
• Normal wear and tear.
• Engines. Engines are covered by the warranty
provided by the relative manufacturer in
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Tyre pressure check
General cleaning and inspection
General lubrication
Check transmission belt wear
Check/adjust the steering wheel
Battery power reserve
Clean battery terminals
ENGINE/TRANSMISSION (general)
Check/top-up engine oil
Check/top up drive oil
Transmission oil change
Engine mod. B&S Vanguard
Replacement of the engine oil
Oil filter replacement
Air filter cleaning
Air filter replacement
Spark plug replacement
Air vent cleaning
Check/replace fuel filter
Engine mod. ST.
24

13 SUMMARY MAINTENANCE TABLE

ENGLISH
(Translation of the original instructions)
compliance with the specified terms and
conditions.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are not
in any way restricted by this warranty.
Frequency
working hours/calendar months
First time
-
-
-
-
- 50 hours and after each cleaning
5 hours
5 hours
-
-
-
1 hour
5 hours
-
-
-
-
-
-
-
Subsequently
Before each use
Before each use
Before each use
After each use
50 hours
100 hours
Before storage.
In machines with electric
starter: charge every 4
months
When oxidised
Before each use
50 hours
200 hours
100 hours/Once a year
100 hours/Once a year
25 hours/Once a year
100 hours or once a year
100 hours/Once a year
5 hours/After each use
400 hours/Once a year
Par. /
Ref.
fig.
-
-
-
-
9.12
9.8
9.9
9.10
9.10.4
9.5.1
9.7.1
9.7.2
9.5.2
9.5.3
9.11.1
*
9.11.1
(*)
9.11.2
9.11.3
9.6 (**)