1
General
This technical manual contains all the necessary instructions for the installation, start-up and
maintenance of the measuring and control unit from MULTRONIC series.
The safety instructions and pointers must always be observed!
1.1
Scope of guarantee
The manufacturer only accepts the guarantee with regard to the operating safety, reliability
and capacity of the measuring unit under the following conditions:
- Assembly, connection, adjustment, maintenance and repairs are carried out by authorized,
qualified personnel.
- The metering unit is used in accordance with the instructions in the technical manual.
- Only orginal spare parts are used for repairs.
For the remainder the general warranty and service terms of ECOLAB Engineering
GmbH shall apply.
1.2
Contact address / manufacturer
ECOLAB Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf
Telefon (+49) 86 62 / 61 0
Telefax (+49) 86 62 / 61 2 35
eMail:
engineering-mailbox@ecolab.com
417101163_Multronic.doc
Rev: 014-11/07