Stopping The Engine - Enarco ENAR ZEN Manuel D'instructions

6.4

STOPPING THE ENGINE

6.4.1.
6.4.2.
6.4.3.
HATZ 1B20 MOTOR
-
6.4.4.
6.4.5.
en
16
ZEN / ZEN-E
Before stopping the engine, leave it idling for 2-3 minutes and then press the stop button
until the engine comes to a complete standstill.
Close the fuel cock.
If the water system has been used, close the water reservoir cock.
To stop the motor, move the throttle to the idling position, then press the red stop button
until the motor stops. Check that when released, the button returns to its original
position.
Shut off the flow of fuel by moving the OPEN/CLOSE lever for the carburettor to the left.
VIBRATING PLATES