Enarco ENAR ZEN Manuel D'instructions page 52

Hatz motor
7.3.4.
7.3.5.
7.3.6.
7.3.7.
!
en
20
ZEN / ZEN-E
Remove the screw from the filter cover.
Remove the filter cartridge from the air filter housing. Shake it or blow it with low
pressure.
Replace the filter.
Put the cover back on the housing and screw back into position.
:
PRECAUTION
Where it is not possible to clean the filter satisfactorily using this procedure

(eg. wet or greasy dirt), a new filter cartridge should be inserted instead.
Ensure that the gasket on the cartridge is not damaged.

Check there are no cracks in the filter cartridge or any other type of damage in

the paper filter, by placing up against the light or shedding light on it from
another source.
VIBRATING PLATES