Characteristics; Characteristics Of The Engine; Characteristics Of The Screeds - Enarco ENAR MISTRAL Manuel D'instructions

2

CHARACTERISTICS

Light screed for finishing the floors superficially. The main characteristic of this equipment is its low weight;
only one person is needed for using it. The use of rail-guide is not necessary, this machine is suitable for
working directly on the concrete mass. The aluminium beam has a high resistance and a good flatness. On
the screeds with petrol engine, vibration can be controlled with the accelerator lever.

2.1. CHARACTERISTICS OF THE ENGINE:

▼ characteristics
Type/Displacement
Max output/R.P.M.
Carburettor
Ignition
Starting
Fuel
Fuel tank capacity
Weight
2.2. CHARACTERISTICS OF THE VIBRATING SCREEDS:
▼ characteristics
Beam length (m)
Weight (kg)
Centrifugal force (kp)
Acoustic pressure Lpa (dB)*
Acoustic power Lwa (dB)*
Hand-arm vibration (m/s
Uncertainly K (m/s
Working time for taking anti-vibratory
cautions (hours)
Working time limit (hours)
*Noise values measured at
the workstation: 1,6m over
the floor and 0,2m by the ear
of the user.
**Vibration measured in the
handle at 1,5 meters from the
vibrating unit (as shown in
the picture).
PETROL VIBRATING SCREEDS "MISTRAL" TYPE
Model ►
MISTRAL GH - HONDA GX-25
4 stroke 25cc
1,1HP 7000 r.p.m.
Diaphragm type
Transistors magneto
550 cc
2,78 kg
Model ►
2
)**
2
)
MISTRAL GR - ROBIN EH 025
Coil
Petrol
MISTRAL GH
1,5-3
15,5-20
150
113
120
6,67
2,5
1,12
4,49
4 stroke 24,5 cc
1,1 HP 7000 r.p.m.
Diaphragm type
Transistors magneto
Coil
Petrol
500 cc
2,8 kg
MISTRAL GR
1,5-3
15,5-20
150
113
120
6,67
2,5
1,12
4,49
Z
Y
en
X
3