How To Install The Camera; Connection Of The Camera - Videotec MAXIMUS MVX Manuel D'instructions

8.5 How to install the camera

The cameras to be installed shall not
contain cells or batteries.
For additional information on installable
cameras, refer to the relative chapter (3.1.2
Characteristics of installable cameras, page
10).
Mount the camera/lens on the inner slide so that the
mounting height allows a perfect view through the
window.
Fig. 15
Minimum installation distance between the camera
and the housing glass: 4mm (0.16in) (the distance is
the edge of the slide).
Fig. 16
22
4mm

8.6 Connection of the camera

CONNECTION OF THE CAMERA
Version Power supply Video signal
Generic IP J13 (connec-
version tors board)
Analog J1 (control
version/ board)
Digital SD
version
Digital HD J6 (control
version board)
Tab. 10
The IP version video signal cable is
connected directly to the camera.
Fig. 17
Communica-
tion lines
Camera –
connector/
Direct con-
nection to the
camera
J1 (control J1 (control
board) board)
J12 (connec- J12 (connec-
tors board) tors board)
MNVCMVXTHD_1813_EN