Whirlpool WEG730H0DS0 Fiche Technique page 4

FOR SERVICE TECHNICIAN'S USE ONLY
5. To activate the relays manually in the test mode, press the
following keypads:
Key Pressed Relay Activated
Bake (Main) K4 (bake igniter or element) On/Off
K5 (broil igniter or element) On/Off and
Broil
K3 (broil assist element) On/Off (for gas models only)
Keep Warm K7 (convection fan) On/off
Bake (Drawer) K1 (drawer element) On/Off
Convect K2 (convection element) On/Off
Downdraft High K11 (downdraft fan high) On/Off
Downdraft Low K8 (downdraft fan low) On/Off
Warming Zone K12 (warming zone) On/Off
Oven Light/Triac K6 (oven light) On/Off
Timer K9 (cooling fan) On/Off
NOTE:
In Test Mode, double line break relays (K13 and K14) are
■
automatically turned ON.
When a relay is activated the appropriate letter as shown in the chart
will be displayed
Relay Activated
Bake
Broil
Convect
Convect Fan
Cooling Fan
Door Open
Door Closed
Drawer
Oven Light/Triac
Cooktop Lockout Solenoid Valve (for gas models only)
If the control reads that the cavity sensor is open or not connected, it will
display error code "F3E0" and "0Pn." If the control reads that the cavity
sensor is shorted, it will display error code "F3E0" and "Srt."
4
Display
b
r
c
H
C
l
0
D
%
Cooktop icon is lit