Whirlpool WEG730H0DS0 Fiche Technique page 12

FOR SERVICE TECHNICIAN'S USE ONLY
CODE WHAT IS IT?
F9E0 Miswired
Product is miswired.
WHEN CAN IT OCCUR? RECOMMENDED CORRECTIVE ACTION PROCEDURE
Anytime a miswired 1.
product condition is
2.
detected.
3.
4.
5.
6.
12
Unplug range or disconnect power.
Check wires and connectors between main control (P6) and
power cord.
Check that the L1-L2-N wiring (pigtail) from the power outlet
is correctly connected to the range terminal block.
Replace all parts and panels before operating.
Plug in range or reconnect power.
Start a self-clean cycle and observe for 1 minute to ensure
that operation is normal. Enter the diagnostic mode to view
the "Faults" screen. Press START TIME or DELAY START to
clear each Fault code(s).