Stanley SPT-182-570 Traduction De La Notice Originale page 11

5. Slide the control cables through the holes in
the control panel. Make certain the cables are
seated properly in roller guides when hook the
cables to the clutch levers.
Speed Shift Linkage
Remove the knob to slide the shift lever
through the slot in the control panel. Secure
shift lever to the shift arm with screw and nut.
Replace the knob.
Discharge Chute
1. Grease underside of discharge chute ring (if
not already greased).
2. Install discharge chute over opening in the
auger housing and secure with fasteners.
11
G
B