Remote Radio Communication Feature; Important - Irritrol Total Control Mode D'emploi

REMOTE RADIO COMMUNICATION FEATURE

All Total Control controllers have the potential for connection of third party radio receivers
or control devices. This feature is enabled in 36- and 48-station controller terminal boards
through a 6-pin remote port.
NOTE:
This feature is for the connection of third-party devices. The Irritrol CMR-1 does
not require this setting.
% Water Budget
1. Turn the dial to
NEXT
2. Press the button until
+
/ON
3. Press either the
R-OFF
: Remote radio communications are Disabled.
R-ON
: Remote radio communications are Enabled.
R-CEN
: Enables a third party device to take complete control of the controller station
outputs.

IMPORTANT!

This seting disables all Automatic and Manual operation from the
Total Control Control Module.
RUN
4. Turn the dial to the
This section covers the following topics:
position.
R-ON R-OFF
, or
– /OFF
or the button to toggle between the following options:
position.
R-CEN
is displayed.
7