Irritrol Total Control Mode D'emploi page 15

Another setting within the Day Interval is the current day of the schedule. The current day
(displayed as today) can be set for any day within the interval. This number automatically
increases by one every day. When the current day number equals the Day Interval number,
a watering day will occur. For example, to water every third day starting today, a 3-day
interval would be set with today as day 3. To water every 5 days starting tomorrow, a 5-
day interval would be selected with the current day set as day 4.
To set a watering day schedule for each program:
1. Turn the function dial to the
current watering day schedule for the selected program.
A B
2. Select Program , ,
3. Set the watering day(s) for the program using one of the three following procedures:
Days of the Week, Odd Days/Even Days or Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule for each program.
Days of the Week
NEXT
a. Press the
display.
ON
b. Press the button. sun (Sunday) will begin fl ashing.
c. To select the day, press the
OFF
the button.
NEXT
d. Press the
e. Repeat steps c and d to set the remaining days of the week.
Odd Days or Even Days
NEXT
a. Press the
ON
b. Press the button to select the schedule.
Optional:
To remove selected days of the week from the Odd/Even watering schedule:
NEXT
1. Press the
OFF
2. Press the
ON
(Press the
Day Interval
NEXT
a. Press the
ON
b. Press the button to select this option.
NEXT
c. Press the
+
–
d. Use the or button to select the Day Interval (1–30 days).
NEXT
e. Press the
+
–
f. Use the or button to select the desired setting for today.
Water days
C D
or with the Program switch.
button until the weekday abbreviations are shown at the top of the
ON
button. To remove the day from the schedule, press
button to select the next day.
button until odd days or even days is displayed.
button until the selected day begins fl ashing.
button to exclude the day from the schedule.
button to restore the day to the schedule.)
button until the day interval option is displayed.
button. The display shows the current Day Interval number (1–30).
button. The controller displays today and its current setting.
position. The display will show the
13