Transport; Storage; Disposal - Dräger FPS-COM 7000 Notice D'utilisation

Masquer les pouces Voir aussi pour FPS-COM 7000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Transport

7. Close the battery cover. Slightly lubricate the seal with silicone
grease if necessary.
8. Slightly press down the battery cover so that it fits flush to the casing,
and tighten the screw (torque: max. 0.3 Nm, see page 5, Fig. G).
9. Dispose of used batteries in accordance with applicable regulations.
5.3.2
Replacing the earphones
NOTICE
i
i
To prevent premature wear the earphone should only be
removed if faulty.
1. Unfasten the screw using a Torx screwdriver (T8).
2. Disconnect the old earphone from the communication unit.
3. Place the new earphone straight onto the guide on the
communication unit.
Take care that the pins do not become bent (see page 7,
Figure O).
4. Tighten the screw (torque: 0.3 Nm).
5.3.3
Replacing the fastening eyes
1. Unfasten the screw using a Torx screwdriver (T8).
2. Remove the old fastening eye from the communication unit.
3. Attach and screw down new fastening eye on communication unit
(see page 7, Figure P).
4. Tighten the screw (torque: 0.3 Nm).
5.3.4
Dismantling the communication unit from the full face mask
1. Carefully loosen the fastening eyes from the visor frame without
the use of tools.
2. Detach the communication unit from the connection piece.
3. Fit the protective cap onto the full face mask.
36
5.3.5
Installing a firmware update
Firmware updates can be installed using the C7C configuration
software. Refer to the "Help" function in the C7C software for
additional information.
Latest updates at www.draeger.com/software
6
Transport
The communication unit can be transported in its original packaging.
Alternatively, it can be fitted onto the full face mask and transported
with the full face mask in a suitable transport box.
7

Storage

Store the communication unit in a dry, dust-free location. Keep away
from direct sunlight or heat radiation.
Storage temperature see chapter 9 on page 37
8

Disposal

This product must not be disposed of as municipal waste.
This is indicated by the adjacent icon.
You can return this product to Dräger free of charge. For
information please contact the national sales organisations
and Dräger.
Batteries and rechargeable batteries must not be disposed of
as municipal waste. This is indicated by the adjacent icon.
Collect and dispose of batteries and rechargeable batteries at
battery collection centres, in accordance with applicable
regulations.
Dräger FPS-COM 7000

Publicité

Table des Matières
loading

Table des Matières