Description; Product Overview; Product Description; Technical Description - Dräger FPS-COM 7000 Notice D'utilisation

Masquer les pouces Voir aussi pour FPS-COM 7000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
2

Description

2.1
Product overview (see page 3)
1
Earphones
2
Fastening eyes
3
ON/OFF button
4
LED
5
Voice amplifier unit loudspeaker
6
Microphone
7
Insert
8
Group selector switch
9
Integrated push-to-talk button (PTT)
10 Volume controller
11 Mount for masks with P/RA connections
12 Mount for masks with PE/ESA connections
13 Protective cap
Battery compartment (not visible)
Meaning of the warning text on the battery
compartment:
Do not replace the batteries in an explosive
environment!
2.2

Product description

2.2.1

Technical description

The Dräger FPS-COM 7000 is a communication unit for full face
masks in the Dräger FPS 7000 series with P, RA and PE/ESA
connections. The communication unit is equipped with a microphone
and an earphone to allow wireless connection. A second earphone can
be fitted as an option.
Dräger FPS-COM 7000
The communication unit offers the following functions:
Voice amplification for direct communication
The voice amplifier unit loudspeaker simplifies communication
with other persons in the immediate vicinity because a speaker's
voice is transmitted directly and any distortion caused by the mask
body is minimized. The voice amplifier unit loudspeaker can be
switched off if not required. It is recommended to switch off the
voice amplifier unit loudspeaker, for example, during operations in
a chemical protective suit (HazMat mode, see chapter 3.1.6 on
page 28). The wireless connection remains active however.
Connection to a tactical radio
As the built-in microphone improves voice clarity, clear
communication
with
a
communication unit features an integrated push-to-talk button that
makes it easy to send radio messages.
Voice transmission for wireless conference connection ("team
radio")
Team radio facilitates communication in a group. This function
transmits a speaker's voice to all communication units in a group
via radio. Groups can consist of up to 10 members, of which two
persons can speak at the same time. The other group members
are able to listen to the conversation.
Automatic shut-down during periods of inactivity
The automatic shut-down function can be interrupted (see
chap. 3.4.2 on page 30).
An optional configuration software is available for changing the
parameters of the communication unit.
Description
tactical
radio
is
possible.
The
25

Publicité

Table des Matières
loading

Table des Matières