Temperature Selection; Time Selection; Power / Speed Selection; Auxiliary Functions - Virtus AIC0071/F Manuel D'installation, Utilisation Et Maintenance

EN

5.3 TEMPERATURE SELECTION

Use the temperature selection button (control 10) to select the required temperature in the oven interior. This
is displayed in window 9 (chamber temperature setting).
Window 8 shows the true value of the temperature in the chamber.
The temperature range and defect values for each operating mode are listed below:

5.4 TIME SELECTION


Remaining time: Numerical value which shows the time remaining until the selected cooking mode
is completed.
When the time reaches 0, the number starts
to flash, the horn is heard and the light
flashes in time with the horn until the door is
opened or for a maximum of 30 seconds. If
the door is not opened, the acoustic/visual
warning is repeated for 30 seconds every 3
minutes.

Time setting: Time setting selected by the user. The maximum possible time is 300 minutes. When
the operating mode is changed, the last-used value in this mode is automatically loaded.

5.5 POWER / SPEED SELECTION

5.6 AUXILIARY FUNCTIONS

56
Convection
Range [20...300]
18-.19- 20- Temperature / spike / delta (optional) selector button.
21- Button / Cool down display.
22- Humidifier button.
24- Lock burner.
REAL VALUE CAMERA TEMPERATURE
CHAMBER TEMPERATURE SETPOINT
VALUE
TEMPERATURE SELECTOR
Mixed
Range [20...250]
14- Power / Speed selector button.
15- Maximum power / Maximum speed display.
16- Average power / Maximum speed display.
17- Average power / Average speed display.
Steam
Range [99]
TIME REMAINING
DELIVERY TIME
TIME SWITCH