Indications For Use - Össur TOTAL KNEE 2100 Notice D'utilisation

ENGLISH
NUMBERING IN FIGURES
1. Alignment reference line
2. Socket
3. Knee centre reference
4. Front link
5. Balance unit
6. Pivot axis (alignment axis)
7. Hydraulic housing
8. Back link
9. Bottom link
10. Chassis
11. Bumper
12. Shim
13. Bumper cover
14. Extension promoter
15. Valve F (Flexion)
16. Valve H (Heel Rise / Initial Flexion)
17. Valve E (Extension)
18. Spring cup
19. Spring
20. Ferrule
21. Cable
22. Retaining Ring
23. Spring cup seat
24. Knee cap – small
25. Knee cap – large
26. Shin ferrule
27. Bearings (lubrication points)
28. Release points
FUNCTIONS AND BENEFITS
• Increased knee stability and cadence variation.
• Increased toe clearance in swing phase.
• 160° knee flexion – suitable for sitting, kneeling, cycling and other
activities where greater knee flexion is desired.
• 25% increased fluid capacity over Model 2100 with cooling fins for
greater heat dissipation and improved reliability.
• 30mm pylon.
• 24-month warranty.

INDICATIONS FOR USE

• Adult amputee up to 125kg (275lbs) patient weight.
• The Total Knee is exclusively used for lower limb prosthetic fittings.
• Suitable for an unlimited community ambulator who has potential to
walk with varying cadence, and heavier loads.
CLEARANCE (Figure 1)
ALIGNMENT AND ADJUSTMENT (Figure 2)
ADAPTER OPTIONS (Figure 3)
• Prong adapter (A-114040 or A-114030) for knee disarticulation or long
transfemoral residual limbs.
6