Display - Martin Logan CADENCE Mode D'emploi

d
IsPlay
Fig. 10
[Wi-Fi Status]
Your soundbar displays the following information:
Wi-Fi Status: The Wi-Fi icon displays when
a Wi-Fi conneciton is established. If the sound-
bar is configured to connect to a Wi-Fi network
but unable to connect, the icon will change to an
exclamation point.
Please note: The Wi-Fi Status LED on the soundbars
connection panel provides more detailed feedback.
For information on Wi-Fi setup modes and detailed
setup instructions, please refer to the "DTS Play-Fi
and Network Connection" section of this manual.
Audio Codec Status: If an audio signal with
surround sound encoding is detected this icon will
indicate Dolby Digital or DTS Digital
®
20
[Volume Level]
Surround™.
[Audio Codec Status]
[Current Input
Custom Name]
Volume Level: Displays the current volume level.
Current Input: This icon indicates the input that
is currently active using its standard input name.
This field is not customizable.
Current Input Custom Name: This indicates
the input that is currently active using its custom
user defined name.
Anthem Room Correction Status: This
icon indicates that Anthem Room Correction is
active. This icon will not display if an Anthem
Room Correction has been manually turned off
or an adjustment curve has not been uploaded
to the soundbar. For information on setting up
ARC, please refer to the "(ARC™) Anthem Room
Correction" section of this manual.
[Current Input]
[Anthem Room
Correction Status]